Уноси
Search full-text
"Branislav Sredanović"
-
Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report (2012)
B. Sredanović, D. Kramar, G. Globočki-Lakić, J. Kopač, Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report, Project: New approach toward universal definition of machinability in machining, bilateral project BiH -Slovenia, pp. 1 - 10, Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems, Banja Luka, Ljubljana, 2012 -
Contribution to defining of universal machinabilty, report (2012)
B. Sredanović, D. Kramar, G. Globočki-Lakić, J. Kopač, Contribution to defining of universal machinabilty, report, Project: New approach towar universal definition of machinability in machining, bilateral project BiH-Slovenia, pp. 1 - 26, Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems, Banja Luka, Ljubljana, 2012 -
Preliminary experimental research on micro-milling, report (2013)
B. Sredanović, M. Hriberšek, D. Kramar, G. Globočki-Lakić, J. Kopač, Preliminary experimental research on micro-milling, report, Project: Study of universal machinability in cutting processes - part 2, hard-to-machine materials (continued of project bilateral cooperation 2012/2013) bilateral project BiH-Slovenia, pp. 1 - 13, Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems, Ljubljana, Banja Luka, 2013 -
Alati i pribori u obradi rezanjem (2016)
G. Globočki-Lakić, B. Sredanović, Alati i pribori u obradi rezanjem, Univerzitet u Banjoj Luci, Mašinski fakultet, 2016 -
Development of Application for Analysis of Machinability Index (2009)
G. Globočki-Lakić, S. Borojević, Đ. Čiča, B. Sredanović, Development of Application for Analysis of Machinability Index, TRIBOLOGY IN INDUSTRY, Vol. 31, No. 1&2, pp. 57 - 60, 2009 -
Development of mathematical model of universal material machinability (2011)
G. Globočki-Lakić, B. Sredanović, B. Nedić, Đ. Čiča, D. Ćatić, Development of mathematical model of universal material machinability, JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, Vol. 17, No. 4, pp. 501 - 511, 2011 -
Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining (2013)
B. Sredanovic, G. Globocki-Lakic, Dj. Cica, D. Kramar, Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining, STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, Vol. 59, No. 12, pp. 748 - 754, 2013 -
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers (2014)
V. Jovišević, S. Borojević, G. Globočki-Lakić, Đ. Čiča, B. Sredanović, Analysis of effectiveness on production system for production of the tools for hydraulic press brakers, ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering, Vol. 12, No. 2, pp. 127 - 132, 2014 -
Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study (2015)
Dj. CIca, B. Sredanovic, D. Kramar, Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, Vol. 50, No. 1, pp. 49 - 64, 2015 -
High Pressure Jet Assisted Machining – Application in Turning (2015)
G. Globočki-Lakić, B. Sredanović, High Pressure Jet Assisted Machining – Application in Turning, Tribological Journal BULTRIB , Vol. 5, No. 5, pp. 111 - 118, 2015 -
Identification of dynamical contact parameters for spindle-holder-tool assembly (2016)
Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Identification of dynamical contact parameters for spindle-holder-tool assembly, Journal of production engineering, Vol. 19, No. 1, pp. 57 - 60, 2016 -
Machinability of C45e Steel - Application of Minimum Quantity Lubrication and High Pressure Jet Assisted Machining Techniques (2016-05)
G. Globočki-Lakić, B. Sredanović, D. Kramar, J. Kopač, Machinability of C45e Steel - Application of Minimum Quantity Lubrication and High Pressure Jet Assisted Machining Techniques, TRANSACTIONS OF FAMENA, Vol. 40, No. 2, pp. 45 - 58, May, 2016 -
Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques (2020)
D. Cica, B. Sredanovic, S. Tesic, D. Kramar, Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques, International Journal of Machining and Machinability of Materials, Vol. 22, No. 2, pp. 153 - 164, 2020 -
Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques (2024)
Dj. Cica, B. Sredanovic, S. Tesic, D. Kramar, Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques, Applied Computing and Informatics, Vol. 20, No. 1-2, pp. 162 - 180, 2024 -
Experimental investigation of tool deflection in micro-milling of fine-grained graphite (2022)
Dj. Cica, B. Sredanovic, G. Miljušković, Experimental investigation of tool deflection in micro-milling of fine-grained graphite, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 123, pp. 161 - 168, 2022 -
Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions (2022-01)
S. Tešić, Đ. Čiča, S. Borojević, B. Sredanović, M. Zeljković, D. Kramar, F. Pusavec, Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, Vol. 9, No. November 2022, pp. 1427 - 1437, Jan, 2022 -
Development of Application for Analysis of Machinability Index (2009)
G. Globočki-Lakić, S. Borojević, Đ. Čiča, B. Sredanović, Development of Application for Analysis of Machinability Index, Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4, pp. 251 - 254, 2009 -
Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja (2009)
S. Borojević, B. Sredanović, G. Globočki-Lakić, Đ. Čiča, Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja, 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4, pp. 31 - 34, 2009 -
Modeliranje vretenastih glodala primjenom CAD/CAM sistema (2010)
B. Sredanović, G. Globočki-Lakić, Đ. Čiča, S. Borojević, Modeliranje vretenastih glodala primjenom CAD/CAM sistema, pp. 3.28 - 3.31, 2010 -
Vector based approach in definning of universal machinability (2010)
G. Globočki-Lakić, B. Sredanović, S. Jokanović, S. Borojević, Đ. Čiča, Vector based approach in definning of universal machinability, International Conference on Innovative Technologies, ISBN 978-80-904502-2-6, pp. 326 - 330, 2010